CSIR-NML
 AcSIR-Faculty Profile
View Portfolio
Personal Profile
Name: Vikas C. Srivastava pic
Email: vcsrivas@nmlindia.org
Gender: Male
Designation: Principal Scientist DOB: 08-12-1973
Division: MEF Mobile No.: 9431379162
Phone No.: 0657-2345041 Total Years
ofExperience:
13
Address.:
Academic Qualification: 2000- Indian Institute of Technology (BHU) - Ph.D. (Physical Metallurgy)

1996 - Indian Institute of Technology (BHU) - M.Tech. in Materials Technology

1994 - Kamla Nehru Institute of Technology - B.Tech. in Mechanical Engineering
Experience Details: (1) Indian Institute of Technology (BHU), Varanasi, Senior research Fellow, 1996-2000.

(2) National Metallurgical Laboratory, Junior Scientist, 2000-2003.

(3) DAAD Long term research fellow, Institute fuer Werkstofftechnik, Bremen, Germany, 2002-2004 (On deputation)

(4) National Metallurgical Laboratory, Scientist, 2003-2006.

(5) National Metallurgical Laboratory, Senior Scientist, 2006-2010.

(6) Alexander von Humboldt fellow, Institute fuer Werkstofftechnik, Bremen, Germany, 2007-2009 (On deputation).

(7)National Metallurgical Laboratory, Principal Scientist, 2010-till date

Professional Profile
Introduction:
Research Area: Metallic foams, spray forming, alloy development, Thermomechanical processing, AMorphous and nanocrystalline materials
Major Projects Undertaken:
Specialization: Materials Processing
Patents/ Copyrights:
Publications: 76 (Refereed journals) + 31 (refereed conference proceedings)

Publications can be viewed at :

http://scholar.google.co.in/citations?user=LxEGB18AAAAJ&hl=en

http://www.researcherid.com/rid/C-9668-2010

Conferences/Workshops
/Seminars Organized:
Conferences/Workshops
/Seminars Attended:
1.�Microstructural and wear characteristics of spray deposited hypereutectic Al-Si alloys� V.C.Srivastava, R.K.Mandal and S.N.Ojha Eighth Annual General Meeting of Materials Research Society of India held on February 10-12, 1997, Mumbai, India

2. �Analysis of Microstructural Development in Al-Si Alloys During Spray Atomisation and Deposition� V.C.Srivastava, R.K.Mandal and S.N.Ojha International Conference on Metallurgical Technologies held on December 8-12, 1998, Varanasi, India

3. �Microstructural characteristics and mechanical behaviour of spray deposited Al-Si alloys� V.C.Srivastava, R.K.Mandal and S.N.Ojha International Conference on Rapidly Quenched and Metastable Materials ( RQ-10 ) held on August 23-27, 1999, Bangalore, India

4. �Microstructural characteristics of spray deposited Al-5Fe alloy� V.C.Srivastava, R.K.Mandal and S.N.Ojha Eleventh Annual General Meeting of Materials Research Society of India held on February 3-5, 2000, Vadodara, India

5.�Modeling of Heat Flow and Solidification During Spray Deposition� P.Shukla, V.C.Srivastava, R.K.Mandal and S.N.Ojha International Conference on Solidification Science and Processing: Outlook for 21st Century held on February 18-21, 2001, Bangalore, India

6. "On the microstructural development during spray deposition", V.C. Srivastava, R.K.Mandal and S.N.Ojha, International conference on "Perspectives in Physical Metallurgy and Materials Science" held at Bangalore, India, during July 12-14, 2001.

7. �Spray Forming of Al-Si Alloys�, V.C.Srivastava, Conference on �Cost optimization in Foudry in global competition� held at Jamshedpur during December 8-9, 2001.

8. �Microstructural Control During Spray Forming of a Hypereutectic Al-Si Alloy�, V.C.Srivastava, R.K.Mandal and S.N.Ojha, International Conference on Spray Forming (SDMA-2003/ICSF-V), Bremen, Germany, June 23-25, 2003.

9. �Spray Forming of Al-SiCp Composites�, M.Anil, V.C.Srivastava and S.N.Ojha, National Conference on Advanced Futuristic Materials held at RRL Bhubaneshawar, April 22-24, 2004. (Invited lecture)

10. "Thermomechanical Treatment of Spray Formed Cu-Ni-Si Alloy", V.C.Srivastava and P.K.De, NMD-ATM 2004 of Indian Institute of Metals held at Thiruvananthapuram, during November 17-19, 2004.

11. �Spray processing of 2014-Al based SiC reinforced composites and their evaluation", V.C.Srivastava, V. Uhlenwinkel, A. Schneider and K. Bauckhage, Interanational Conference on Recent Advances in Composite Materials (ICRACM-2004), Varanasi, India, December 17-19, 2004.

12. �A study of kinetics of reactive diffusion in the roll bonded iron�aluminum couples�, Vikas Jindal, V. C. Srivastava, Arpan Das, R.N. Ghosh, at the seminar on Advances in Metallography and Microstructure (Microstructure -2005) held at Bhabha Atomic Research Centre, Mumbai, India during December 1-2, 2005.

13. "Processing of Al-Si-Fe alloys by spray atomisation and deposition route", V.C.Srivastava, Conference on "Challenges for Indian Foundries to Meet Customer Aspirations" held at Jamshedpur, India, during December 09-10, 2005.

14. �Developments in spray processing of metal matrix composites�, V.C.Srivastava, invited talk at ETMPT-2006 held at Varanasi during March 23-24, 2006.

15. �Deformation Behaviour of spray formed 2014-Al+SiC composites� V.C.Srivastava, V. Jindal, V. Uhlenwinkel and K. Bauckhage, SDMA2006 and ICSF-VI held at the University of Bremen, Germany, during September 04-06, 2006.

16. �Spray processing of alloys and composites�, V.C.Srivastava, in the NMD-ATM2006 held at Jamshedpur, India, during November 13-16, 2006.(Keynote lecture)

17. �Fabrication of Ni-Al based MIL composites� Tarunjot Singh, Shilp Kumar, V.C.Srivastava, S.Ghosh Choudhary and Vikas Jindal, NMD-ATM 2006 held at Jamshedpur during Novemeber 13-16, 2006.

18. �Microstructural Characteristics of Accumulative Roll Bonded Ni-Al Based Metal Intermetallic Laminate Composite�, Srivastava, V.C., Singh, T., Kumar, S., Choudhary, S.G. and Jindal, V., Second international Conference on Recent Advances in Composite Materials (ICRACM-2007) held at New Delhi during February 20-23, 2007.


19. �Spray deposition processing of Al-alloys and composites�, S.N.Ojha and V.C.Srivastava, at the International conference on metals and alloys: Past, present and future (METALLO-2007) held at IIT-Kanpur during December 7-10, 2007.

20. �Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming�, Srivastava, V.C., Uhlenwinkel, V., Schulz, A., Zoch, H.-W., Mukhopadhyay, N.K., Chowdhury, S.G. at the Tenth international conference on Quasicrystals (ICQ10) held at Zurich (Switzerland) during July 7-11, 2008.

21. �Mechanical milling of spray-formed singlephase Al-Cu-Fe quasicrystals: effect of milling intensity�, N.K. Mukhopadhyay, F. Ali, V.C. Srivastava, M. Sakaliyska, K.B. Surreddi, S. Scudino, V. Uhlenwinkel, J. Eckert, at the VIth International conference on mechanical alloying and mechanochemistry helt at Jamshedpur during December 1-4, 2008.

22. �Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys�, Srivastava, V.C., Surreddi, K.B., Scudino, S., Schowalter, M., Uhlenwinkel, V., Schulz, A., Eckert, Rosenauer, A., J. and Zoch, H.-W., at the International Conference on Spray Forming (SDMA-2009/ICSF-VII) held at Bremen, Germany, during September 7-9, 2009.

23. �Development of novel materials by spray forming�, V.C.Srivastava at the Fourth Asian Conference on Paticle Technology (APT2009) held at New Delhi, India, during September 14-16, 2009. (Invited lecture)

24. �Spray forming of bulk Al-alloys with co-existing amorphous, nano- and micro-crystalline structures�, V.C.Srivastava and V.Uhlenwinkel at the 4th international conference on solidification science and processing held at Chennai, India, during November 20-23, 2009. (Invited lecture)

25. �Processing of Al alloys for specialty applications� V. C. Srivastava at the Symposium on �Solidification of Al alloys� held at the Aditya Birla Science and Technology Centre, Mumbai, during November 9, 2011. (Invited lecture)

26. V.C.Srivastava, M. Singh, T. Kumar, K.L.Sahoo (2011):�Effect of composition and foaming temperature on pore size, distribution and properties of Al-foams� at the 7th international conference on porous materials and metal foams held during September 18-21, 2011 at Busan, South Korea.

27. V.C.Srivastava, N.K. Mukhopadhyay, V. Uhlenwinkel:� Synthesis and characterization of bulk i-AlCuFe quasicrystals by spray forming� at the Conference cum Workshop on Electron Microscopy (CWEM-2012)� held at IIT-BHU, Varanasi, India, during December 6-8, 2012.

28. D. Paswan, D. Mistry, K.L.Sahoo, V. C. Srivastsava :�Development of iron-based closed cell foams� during the National Metallurgist Day-Annual Technical Meeting held during Novemebr 14-16, 2012.

29. Srivastava, V.C., Ellendt, N., Meyer, C, Uhlenwinkel, V., �Development of bulk amorhous/nanocrystalline materials by spray forming�, at the International Conference on Spray Forming (SDMA-2013) held at Bremen, Germany, during September 25-27, 2013. (Keynote lecture)

30. Srivastava, V.C., �Development of bulk Al-Cu-Fe based quasicrystalline materials by spray forming�, at the NMD-ATM2013 held at IIT-BHU (Varanasi) during November 12-15, 2013 (Invited lecture)
Books Published:
Awards: 2007: Young Metallurgist of the Year award from Ministry of Steel, Govt. of India

2002-2004: DAAD Long Term Research Fellowship, Bremen, Germany

2007-2009: Alexander von Humboldt research Fellowship, Bremen, Germany

2012: Alexander von Humboldt re-invitation fellowship

Memberships: - Life member Indian Institute of Metals

- Life member Materials research Society of India
Others: